Table 1. Optimum ranges for water quality parameters to determine suitability of water sources for hydroponic cropping systems
Parameter
Optimum range
pH
5.5–7
EC (dS/m)
0.2–0.8
Alkalinity
40–160 ppm CaCO3 equivalent
Dissolved oxygen
>6 ppm
Total suspended solids
<30 ppm
Problematic ions
Parameter
Optimum range
Sodium
<50 ppm
Chlorine
<70 ppm
Sulfates
<90 ppm
Boron
<0.5 ppm
Fluor
<1 ppm
Calcium
<150 ppm
Magnesium
<75 ppm
Iron
<1 ppm
Manganese
<1 ppm
1 ppm is the same as 1 mg/L (1 mg of the element in 1 liter of water)
Research
Modeling Bibb Lettuce Nitrogen Uptake and Biomass Productivity in Vertical Hydroponic AgricultureArticle
"As nutrient concentrations increased, fresh and dry biomass increased consistently up to the 132 mg L−1 (baseline MSS) treatment. However, the 264 mg L−1 treatment demonstrated a decrease in fresh and dry mass from the 132 mg L−1 treatment."
Seasonal Changes in Growth, Nitrogen Nutrition, and Yield of Hydroponic LettuceArticle
"A N concentration of 100–150 mg·L−1 was sufficient to maximize the growth and fresh weight yields of these lettuce cultivars under the conditions of this study."
Effects of Nutrient Composition and Lettuce Cultivar on Crop Production in Hydroponic CultureArticle